ReadyMadeRC
DRAGONLINK 2 LONG RANGE UHF RC SYSTEM
Includes:, 1 Transmitter Module, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
One of the most popular long range UHF R/C systems, ...ReadyMadeRC
RCCC (RC CAMERA CONTROL SYSTEM)
| Size | 23mm x 40mm (including connectors) |
| http | //youtu.be/oiweyiRv2XU |
| http | //youtu.be/ilNBCHuLSoA |
RC Camera Control (RCCC) has following features:, , Weight: 8g, Available Shutter cables (sold separately):, Canon with C3 connector (like Canon 5D or 7D), Helpful videos for RCCC setup:, Setup when using sum PPM RCCC v1.1,
Introducing the 3 in 1, 3-way Video switch, RC Shutter, ...ReadyMadeRC
SMARTFPV - 3 WAY RC VIDEO SWITCH BY KRISTAPS
| All pin headers have same pin functions | GND, +V, Video |
Introduction:, SmartFPV 3 way RC video switch allows switching between 3 cameras while flying FPV. You can switch between flight camera, back view camera and camera facing down or use switch to see view from camera that takes pictures., Features:, - 3 video inputs, 1 video output, Connecting:, You can connect RC video switch to RC receiver’s regular servo channel or sum PPM connector. It will automatically detect type of RC signal., Configure PPM control channel:, To change PPM channel used to control video switch you need to toggle 8 times needed transmitter switch within 10s after video switch is powered ON., Video connectors:, SmartFPV video switch has 3 video inputs and 1 video output. Connection is made with common 3 pin servo style connectors., Video power:, All middle pins of 3 pin video connectors are interconnected to share same power between video cameras and video transmitter connected. You can power all devices either by feeding voltage to one of video devices connected or by soldering additional leads to battery input and connect battery. Battery connection leads are not included.,
- Regular servo channel or sum PPM control from RC ...ReadyMadeRC
FLIP FPV FRAME PRO (BLACK/GREEN)
| Size | Width 14.5" (375mm) Length 11" (280mm) |
| Weight | 16oz |
| Diagonal Measurement (diagonally motor to motor) | 450mm |
ReadyMadeRC
FLIP FPV FRAME PRO-GIMBAL (BLACK/GREEN)
| Size | Width 14.5" (375mm) Length 11" (280mm) |
| Weight | 16oz |
| Diagonal Measurement (diagonally motor to motor) | 450mm |
Recommended Gimbal and Controller:, ToughBG,
*Contains frame with 2 black and 2 green arms The ...ReadyMadeRC
FLIP 360 FPV FRAME (BLACK/GREEN)
| Frame weight | only 290 grams. |
| Recommended motor size | 28mm 1000kv - 1300kv |
| Recommended battery | 3s 2200mah - 3s2800mah |
| Frame Size Motor to Motor | (Length) 9-1/8" (233mm) x (Width) 12" (306mm) (H style motor configuration) |
| Frame Physical Size | 12"L (306mm) x 12-1/8"W (310mm) x 3.5"H (89mm) |
: The arms are black and green., Max prop size: 8", A few recommended motors:, Tiger Motor MS2208-18 1100KV, INCLUDES:, FRAME, HARDWARE, LANDING GEAR, BATTERY STRAP, AND HEX DRIVER.,
NOTE The new FLIP 360 is designed to be an ...ReadyMadeRC
VOLO ULTRA COMPACT LEDS - GREEN
| Emitting Colour | Green |
| Voltage | 12V DC (3S LiPo suitable) |
| Size | 21mm x 7mm x 3.6mm (LxWxH) |
| Operating Temp | -40 to +85 degrees Centigrade |
| Chip technology | AlInGaP |
| Adhesive tape | 3M VHB 0.5mm Double sided Black Foam |
Specifications:, ,
Unlike any other LED, the VOLO LEDs were specifically designed ...ReadyMadeRC
STROBON NAVIGATION STROBE (GREEN) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...ReadyMadeRC
GOPRO RC-USB CHARGE CABLE
| Cable Length | 30cm |
Supply Voltage: 5V, Important:, This cable works with standard 5V BECs or 4.8v Flight batteries. Dont connect it to new generation 7.4v(2S) High Voltage systems.,
Servo plug type charge and supply cable for your GoPro ...ReadyMadeRC
IC-LOC GREEN WICKING THREAD LOCKER - 1/3 OZ
,
BSI’s IC-Loc™ threadlockers are anaerobic adhesives that cure in the ...ReadyMadeRC
READY MADE RC 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+
| Working Voltage | 7v-17v, 2-4s lipo (12v Standard) |
| Overload Protection | 0.8A |
| Overload Protection Time | 600s (After 600s, gimbal will stop working automatically) |
| Max Torque | 330us |
| Weight | 178g |
Specifications:, , Customer Video:,
Introducing the Ready Made RC 2 Axis Gimbal for GoPro ...ReadyMadeRC
LED NAVIGATION LIGHT DISC - WITH JST PLUG (GREEN)
,
Super bright LED Navigation lights for your RC vehicle! 12 ...ReadyMadeRC
RMRC PICO WIRING HARNESS FOR ALTITUDE RC 5.8 GHZ TX (2PCS)
,
Plug and play APV cable set for the Altitude RC ...